General Description
This Specification is for Globe Model # GTTU202-30-20, Steel, Tandem Axle, Engineer Equipment Trailer a Maximum (GVWR) of 32,000 lbs & Weight of 12,000 lbs.
The Trailer Is Used to Transport Marine Corps Backhoe Loader, Lightweight Rough Terrain Forklift, Multi Terrain Loader with Work Tools & Ammunition and will be Towed by the MTVR.
See Below For Full Specifications
MORE INFO
Capacity, Ratings & Speeds
GVWR: 32,600 lbs.
GVW: 12,600 lbs.
Payload: 20,000 lbs.
55 MPH unloaded on highways
45 MPH with 10-Ton load on highways
35 MPH with 10-Ton load on gravel road
15 MPH with 10-Ton load off road
Frame
Main Beam: 10” I-Beam main frame
Cross Member: 4” Jr. I-Beams on 12” centers
Side Rails: 6” channel side rail
Header: 8” channel
Tool Box:
Lockable
located at front of trailer and rear of trailer.
Dimensions
Overall Length: 31’ 0” (372”)
Overall Height: 44’ 2 ½” (146.5”)
Deck Length: 20’ 3” (243”)
Tongue: 6’ 9” (81”)
Beavertail: 4’ 0” (48”)
Total Width: 8’ 1” (97”)
Deck Height: 4’ 0” (48”)
Ramps: 21” x 110 ½” Cleated
Fording: 60”
Ground Clearance: 25”
Draw Bar Tongue
Length 81”,
heavy duty 3” pintle eye
1 5/8” ring
adjustable height positions from 35 to 40”
Ramps
2-ea 21” x 110 ½” fold up adjustable from 8’ 0” to 5’ 4” self-cleaning with spring assists and safety chains.
Ramps are capable of supporting vehicles weighing 20,000 lbs.
Axles:
2-ea 25,000 lb capacity.
Landing Gear:
Two (2) drop leg landing gear legs, lifting capacity 50,000 lbs. Rear of has two (2) stabilizer legs at the rear of trailer to use when loading the trailer and are to be rotated up when in transit.
Wheels and Tires
4-ea 425/65 R x 22.5 “L” load range, on/off road
Wheels
4-ea. 12.25 x 22.5, 10 hole hub piloted steel disc wheels, on/off road.
Spare tire & rim 425/65 R x 22.5 “L” w/ 8.25 x 22.5 rim mounted on trailer tongue.
Brakes
16 ½” x 7 air brakes w/ automatic slack adjusters, type 30/30 spring parking brakes w/ ABS 4S2M system
compatible with 24 volt system.
Additional Items
Spare Tire and Davit
to aid in loading/unloading the spare tire with rim.
Eight (8) ISO Twist Locks
capable of handling one (1) QUADCON Container and one (1) MTL tool carrier. (20’ ISO container capabilities available upon request).
BIL (Basic Issue Items)
Two (2) wheel chocks with lanyard.
Five (5) load ratchet binders
Five (5) Transport Chains
with grab hooks 3/8” in diameter 120” long capable of withstanding 30,000 lbs pull.
Tire changing tools with lifting jack.
Lockable Tool / Storage Box
secured using a padlock size .375 inches. Drain holes in tool box to allow water to drain if entered.
Commercial standard mud flaps
Trailer conforms to MIL-STD-1366, MIL-STD-810, & MIL-HDBK-1791 for (Transportability, Rail Transport, Marine Transport, Highway Transport, Air Transport, & External Helicopter Transport)
Tie-Down & Sling provisions in accordance with MIL-STD-209 & all provisions are labeled accordingly.
Capable of transporting ammunition
Suspension
Heavy duty single point spring suspension system on/off road, 50,000 lb capacity.
Electrical
12/24-Volt electrical system, all lighting ominvolt LED in rubber grommet mountings to DOT specifications. Trailer has two (2) tail/stop blackout lights conforming to MIL-STD-1179.
Tie Down
Twenty (34) “D” link tie downs twenty eight (28) on the load deck, two (2) on front edge and four (4) on the rear (beavertail), “D” links have a minimum design load of 26,400 lbs per ring.
Deck
Apitong flooring secured to frame with 5/16” self-taping torque screws.
Finish: Sandblasted to near
Conforms to MIL-STD-130 with identification plates showing specific UID markings. Plates include contractor’s model number, NSN, USMC registration number, trailer identification number, weight, date of mfg, and date of delivery. Plates conform to A-A-50271 or standard plates subject to approval.
Trailer is equipped with instruction plates and/or diagrams describing procedures followed for operation, service, and lubrications. Plates are in accordance with A-A-50271 and be affixed to the trailer using screws, bolts, or rivets.
Trailer has a shipping plate of the EET with a silhouette showing the transport configuration, weight, center of gravity, as well as location and capacity of the slinging and tie-down provisions.
Weld procedures and qualifications are in accordance with D14.3.
Other Items
Operation & Maintenance Manual
Service & Training CD
Service Manual (Parts & Service Sections)
Warranty: 1 year against defects in materials, workmanship, & parts.
Copyright © 2011 GLOBE TRAILERS
All Rights Reserved
